Filtration issue
- Dadof4
- Tech Team
- Posts: 2862
- Joined: Sun Oct 19, 2008 5:50 am
- Gender: Male
- My Puffers: 1 GSP (Microfiche) RIP, 1 Monotrete Turgidus (Leon) in a 30gal. 1 Monotrete suvattii in a 40 gal FW. 120 gallon BW with 3 juvenile Dragon Gobies (so cool). 55 gal with a 2" GSP named Hank. 180 gallon being set up for a Fahaka in the next few months!
- Location (country): United States
- Location: North Wisconsin
Filtration issue
Just lost all faith in my Marineland C series filters. Went to bed last night and tank looked fine, woke up this morning to gasping dragon gobies and mollies floating everywhere. Sometime during the night the Aqua Block that the hoses connect to snapped a piece and shut off the flow. I tested water and came up with ammon. 4, nitrates 0. Didn't bother with the nitrites, don't have the end product. This is the second time I've had issue with this filter, first time cost me a ton of money. I now need to build an emergency filter...thank goodness I have a GSP at the same SG.
"Darwin swings...annnnnnd a miss. Boy Jim, Chuck's suffered at the plate tonight. He's 0 for 3 and I'm not sure he's recovered from that shoulder pull a few weeks ago. I'll bet the front office is re-thinking that contract."
- PolishPuff
- Mbu Puffer
- Posts: 1212
- Joined: Mon Oct 26, 2009 1:20 pm
- Gender: Male
- My Puffers: ________
Also cared for;
Fahaka------------------- Had to give it away
Auriglobus modestus-----Traded
Auriglobus silus ---------Died during transport.
Figure Eight Puffers -----Sold and or traded
Dwarf Puffers ------------Traded
Congo Puffer ------------Traded
South American Puffers -Traded
Carinotetraodon lorteti --Died under my supervision :( - Location (country): USA-Chicago, IL
- Location: Chicago, IL
Re: Filtration issue
OH NO,so sorry, I was about to post a question asking if Marineland filters are worth the money?
"Lost time is never found again" Benjamin Franklin
- Dadof4
- Tech Team
- Posts: 2862
- Joined: Sun Oct 19, 2008 5:50 am
- Gender: Male
- My Puffers: 1 GSP (Microfiche) RIP, 1 Monotrete Turgidus (Leon) in a 30gal. 1 Monotrete suvattii in a 40 gal FW. 120 gallon BW with 3 juvenile Dragon Gobies (so cool). 55 gal with a 2" GSP named Hank. 180 gallon being set up for a Fahaka in the next few months!
- Location (country): United States
- Location: North Wisconsin
Re: Filtration issue
Depends. I've had good ones and bad ones.
"Darwin swings...annnnnnd a miss. Boy Jim, Chuck's suffered at the plate tonight. He's 0 for 3 and I'm not sure he's recovered from that shoulder pull a few weeks ago. I'll bet the front office is re-thinking that contract."
- Pufferpunk
- Queen Admin
- Posts: 32988
- Joined: Tue May 31, 2005 11:06 am
- Gender: Female
- My Puffers: Puffers I have kept:
T lineatus
T miurus
A modestus
T biocellatus
C valentini
C coranata
C papuan
C lorteti
DPs
suvattii
burrfish
T niphobles - Location (country): USA, Greenville, SC
- Location: Greenville, SC
- Contact:
Re: Filtration issue
I'll go Hagen Aquaclear any day, over Marineland.
You are getting sleepy... you only hear the sound of my voice... you must do water changes... water changes... water changes... water changes...
"The solution to pollution is dilution!"
"The solution to pollution is dilution!"
-
Eager Newbie
- Figure 8 Puffer
- Posts: 100
- Joined: Sun Nov 15, 2009 9:22 pm
- Location (country): United States
Re: Filtration issue
Sorry if I missed this, but did you move your filter build thread or did you just delete it? I searched but I can't find it any more.
- Dadof4
- Tech Team
- Posts: 2862
- Joined: Sun Oct 19, 2008 5:50 am
- Gender: Male
- My Puffers: 1 GSP (Microfiche) RIP, 1 Monotrete Turgidus (Leon) in a 30gal. 1 Monotrete suvattii in a 40 gal FW. 120 gallon BW with 3 juvenile Dragon Gobies (so cool). 55 gal with a 2" GSP named Hank. 180 gallon being set up for a Fahaka in the next few months!
- Location (country): United States
- Location: North Wisconsin
Re: Filtration issue
My camera died and the thread sat idle too long so I killed it. I am going to restart it tonight, I hate letting posts sit like that because they can get moldy....
"Darwin swings...annnnnnd a miss. Boy Jim, Chuck's suffered at the plate tonight. He's 0 for 3 and I'm not sure he's recovered from that shoulder pull a few weeks ago. I'll bet the front office is re-thinking that contract."
-
Eager Newbie
- Figure 8 Puffer
- Posts: 100
- Joined: Sun Nov 15, 2009 9:22 pm
- Location (country): United States
Re: Filtration issue
Lol nice analogy. Def. looking forward to this, as I'm a fan of DIY projects. Tip: reserve a couple posts after your first one and then edit them later if you want to keep things tidy. XD
Did you end up using activated carbon in your filter? I hate the expensive custom made cartridges you have to live with for so many filters. I might build my own as well, looking for inspiration from you
Did you end up using activated carbon in your filter? I hate the expensive custom made cartridges you have to live with for so many filters. I might build my own as well, looking for inspiration from you
- Dadof4
- Tech Team
- Posts: 2862
- Joined: Sun Oct 19, 2008 5:50 am
- Gender: Male
- My Puffers: 1 GSP (Microfiche) RIP, 1 Monotrete Turgidus (Leon) in a 30gal. 1 Monotrete suvattii in a 40 gal FW. 120 gallon BW with 3 juvenile Dragon Gobies (so cool). 55 gal with a 2" GSP named Hank. 180 gallon being set up for a Fahaka in the next few months!
- Location (country): United States
- Location: North Wisconsin
Re: Filtration issue
Actually activated carbon is pretty much useless in a filter after 24 hours. The only time I use it is after I've had to use meds of some sort, then only to get rid of them.
"Darwin swings...annnnnnd a miss. Boy Jim, Chuck's suffered at the plate tonight. He's 0 for 3 and I'm not sure he's recovered from that shoulder pull a few weeks ago. I'll bet the front office is re-thinking that contract."
-
RTR
- Mentor
- Posts: 6155
- Joined: Tue May 31, 2005 4:39 pm
- Gender: Male
- Location (country): East Coast, USA
Re: Filtration issue
Minor clarification: Every material adsorbed by activated carbon has its own saturation point. The time to saturation will depend on the particular material, its possible saturation point, the concentration in the tank, and the flow rate through the filter and carbon. One type of thing may have saturated the carbon, while others are still being adsorbed.
But I do agree that carbon to me carbon is not worth the cost in most cases. Water changes are cheaper and broader spectrum. When you do a 50% partial, you remove 50% of everything dissolved in the water, period. Do another partial and you get 50% of what was left behind the first time.
But I do agree that carbon to me carbon is not worth the cost in most cases. Water changes are cheaper and broader spectrum. When you do a 50% partial, you remove 50% of everything dissolved in the water, period. Do another partial and you get 50% of what was left behind the first time.
Where's the fish? - Neptune