Filtration issue

A place to discuss general puffer care or news.
Post Reply
User avatar
Dadof4
Tech Team
Posts: 2862
Joined: Sun Oct 19, 2008 5:50 am
Gender: Male
My Puffers: 1 GSP (Microfiche) RIP, 1 Monotrete Turgidus (Leon) in a 30gal. 1 Monotrete suvattii in a 40 gal FW. 120 gallon BW with 3 juvenile Dragon Gobies (so cool). 55 gal with a 2" GSP named Hank. 180 gallon being set up for a Fahaka in the next few months!
Location (country): United States
Location: North Wisconsin

Filtration issue

Post by Dadof4 »

Just lost all faith in my Marineland C series filters. Went to bed last night and tank looked fine, woke up this morning to gasping dragon gobies and mollies floating everywhere. Sometime during the night the Aqua Block that the hoses connect to snapped a piece and shut off the flow. I tested water and came up with ammon. 4, nitrates 0. Didn't bother with the nitrites, don't have the end product. This is the second time I've had issue with this filter, first time cost me a ton of money. I now need to build an emergency filter...thank goodness I have a GSP at the same SG.
"Darwin swings...annnnnnd a miss. Boy Jim, Chuck's suffered at the plate tonight. He's 0 for 3 and I'm not sure he's recovered from that shoulder pull a few weeks ago. I'll bet the front office is re-thinking that contract."
User avatar
PolishPuff
Mbu Puffer
Posts: 1212
Joined: Mon Oct 26, 2009 1:20 pm
Gender: Male
My Puffers: ________

Also cared for;

Fahaka------------------- Had to give it away
Auriglobus modestus-----Traded
Auriglobus silus ---------Died during transport.
Figure Eight Puffers -----Sold and or traded
Dwarf Puffers ------------Traded
Congo Puffer ------------Traded
South American Puffers -Traded
Carinotetraodon lorteti --Died under my supervision :(
Location (country): USA-Chicago, IL
Location: Chicago, IL

Re: Filtration issue

Post by PolishPuff »

OH NO,so sorry, I was about to post a question asking if Marineland filters are worth the money?
"Lost time is never found again" Benjamin Franklin
User avatar
Dadof4
Tech Team
Posts: 2862
Joined: Sun Oct 19, 2008 5:50 am
Gender: Male
My Puffers: 1 GSP (Microfiche) RIP, 1 Monotrete Turgidus (Leon) in a 30gal. 1 Monotrete suvattii in a 40 gal FW. 120 gallon BW with 3 juvenile Dragon Gobies (so cool). 55 gal with a 2" GSP named Hank. 180 gallon being set up for a Fahaka in the next few months!
Location (country): United States
Location: North Wisconsin

Re: Filtration issue

Post by Dadof4 »

Depends. I've had good ones and bad ones.
"Darwin swings...annnnnnd a miss. Boy Jim, Chuck's suffered at the plate tonight. He's 0 for 3 and I'm not sure he's recovered from that shoulder pull a few weeks ago. I'll bet the front office is re-thinking that contract."
User avatar
Pufferpunk
Queen Admin
Posts: 32988
Joined: Tue May 31, 2005 11:06 am
Gender: Female
My Puffers: Puffers I have kept:
T lineatus
T miurus
A modestus
T biocellatus
C valentini
C coranata
C papuan
C lorteti
DPs
suvattii
burrfish
T niphobles
Location (country): USA, Greenville, SC
Location: Greenville, SC
Contact:

Re: Filtration issue

Post by Pufferpunk »

I'll go Hagen Aquaclear any day, over Marineland.
You are getting sleepy... you only hear the sound of my voice... you must do water changes... water changes... water changes... water changes...

"The solution to pollution is dilution!"
Eager Newbie
Figure 8 Puffer
Posts: 100
Joined: Sun Nov 15, 2009 9:22 pm
Location (country): United States

Re: Filtration issue

Post by Eager Newbie »

Sorry if I missed this, but did you move your filter build thread or did you just delete it? I searched but I can't find it any more.
User avatar
Dadof4
Tech Team
Posts: 2862
Joined: Sun Oct 19, 2008 5:50 am
Gender: Male
My Puffers: 1 GSP (Microfiche) RIP, 1 Monotrete Turgidus (Leon) in a 30gal. 1 Monotrete suvattii in a 40 gal FW. 120 gallon BW with 3 juvenile Dragon Gobies (so cool). 55 gal with a 2" GSP named Hank. 180 gallon being set up for a Fahaka in the next few months!
Location (country): United States
Location: North Wisconsin

Re: Filtration issue

Post by Dadof4 »

My camera died and the thread sat idle too long so I killed it. I am going to restart it tonight, I hate letting posts sit like that because they can get moldy....
"Darwin swings...annnnnnd a miss. Boy Jim, Chuck's suffered at the plate tonight. He's 0 for 3 and I'm not sure he's recovered from that shoulder pull a few weeks ago. I'll bet the front office is re-thinking that contract."
Eager Newbie
Figure 8 Puffer
Posts: 100
Joined: Sun Nov 15, 2009 9:22 pm
Location (country): United States

Re: Filtration issue

Post by Eager Newbie »

Lol nice analogy. Def. looking forward to this, as I'm a fan of DIY projects. Tip: reserve a couple posts after your first one and then edit them later if you want to keep things tidy. XD

Did you end up using activated carbon in your filter? I hate the expensive custom made cartridges you have to live with for so many filters. I might build my own as well, looking for inspiration from you :)
User avatar
Dadof4
Tech Team
Posts: 2862
Joined: Sun Oct 19, 2008 5:50 am
Gender: Male
My Puffers: 1 GSP (Microfiche) RIP, 1 Monotrete Turgidus (Leon) in a 30gal. 1 Monotrete suvattii in a 40 gal FW. 120 gallon BW with 3 juvenile Dragon Gobies (so cool). 55 gal with a 2" GSP named Hank. 180 gallon being set up for a Fahaka in the next few months!
Location (country): United States
Location: North Wisconsin

Re: Filtration issue

Post by Dadof4 »

Actually activated carbon is pretty much useless in a filter after 24 hours. The only time I use it is after I've had to use meds of some sort, then only to get rid of them.
"Darwin swings...annnnnnd a miss. Boy Jim, Chuck's suffered at the plate tonight. He's 0 for 3 and I'm not sure he's recovered from that shoulder pull a few weeks ago. I'll bet the front office is re-thinking that contract."
RTR
Mentor
Posts: 6155
Joined: Tue May 31, 2005 4:39 pm
Gender: Male
Location (country): East Coast, USA

Re: Filtration issue

Post by RTR »

Minor clarification: Every material adsorbed by activated carbon has its own saturation point. The time to saturation will depend on the particular material, its possible saturation point, the concentration in the tank, and the flow rate through the filter and carbon. One type of thing may have saturated the carbon, while others are still being adsorbed.

But I do agree that carbon to me carbon is not worth the cost in most cases. Water changes are cheaper and broader spectrum. When you do a 50% partial, you remove 50% of everything dissolved in the water, period. Do another partial and you get 50% of what was left behind the first time.
Where's the fish? - Neptune
Post Reply