Ever since the horrible death of my Figure 8, I've been keeping the tank cycled by adding in 6 drops of pure ammonia daily (15 gallon tank). However, even while the puffer was in the tank and I was sure it was fully cycled, I had a minute Nitrite reading on my Nutrafin test (~1ppm) even though nitrates were present (~5ppm).
So, while keeping my tank cycled, this small presence of nitrite has remained. Finally, to test out which was giving me a false positive, I added in ~5ppm of ammonia. The next day, the nitrite spiked (>5ppm) and went down over a period of 3 days back to ~1ppm where it's stayed.
I also bought a high-end pH test kit by Nutrafin, since the water in this area is generally on the more basic end of things (ph ~7.7) and so I can ensure my puffer's tank is more basic than typical.
The scale on the high-end pH test kit goes from green for 7.4 to blue for 8.6. I add in the water and the reagent and compare it to the chart, but there is no 'black' to compare it to. My other tanks all tested around 7.7, as expected, but after many tries and washings of the test tube, the color from the puffer tank (at 1.005 sg) always turned black. My brought-range pH test kit accurately puts the water at 8.0-8.5 though (LFS tested it a while back at 8.2).
So I finally got the idea to test out these tests on pre-mixed salt water. Despite all the tests saying they are good for fresh and salt water, the premixed salt water tested 1ppm for Nitrite, 0 for Nitrate, and turned black for the pH test kit.
The brand of salt I use is Red Sea, a brand used by the Canadian chain Petcetera for their marine tanks (I'll be switching to Instant Ocean when this runs out as I've found it much cheaper elsewhere).
So...to summarize: does anybody with a brackish tank have Nutrafin test kits and have similar problems?
Nutrafin Tests and Brackish Water
-
TheSilentPerogy
- Puffer Fry
- Posts: 15
- Joined: Sat Jun 04, 2005 4:35 pm
- Location: Edmonton, AB, Canada
-
TheSilentPerogy
- Puffer Fry
- Posts: 15
- Joined: Sat Jun 04, 2005 4:35 pm
- Location: Edmonton, AB, Canada
-
YBeNormal
- Former Staff Member
- Posts: 506
- Joined: Sat Jun 04, 2005 1:19 am
- Location: Northern Virginia
- Contact:
If you cannot buy quality test kits in your area, you might want to consider mail order or have a friend in another area mail one to you.
Test strips might be OK for quick checks but they are notorious for being inaccurate. I use them for quick checks of my swimming pool but I still use drip kits at least once or twice per week just to be sure. I don't and would not use them for testing my fish tanks. JMHO
Test strips might be OK for quick checks but they are notorious for being inaccurate. I use them for quick checks of my swimming pool but I still use drip kits at least once or twice per week just to be sure. I don't and would not use them for testing my fish tanks. JMHO
-
TheSilentPerogy
- Puffer Fry
- Posts: 15
- Joined: Sat Jun 04, 2005 4:35 pm
- Location: Edmonton, AB, Canada