Spraybar BUBBLES

A place to discuss general puffer care or news.
asianpuffer
Figure 8 Puffer
Posts: 229
Joined: Fri Oct 23, 2009 3:52 pm
My Puffers: 38 Gallon Tank
** 3 SAP's
Location (country): AZ

Spraybar BUBBLES

Post by asianpuffer »

I am having a hard time setting up my tank so it gets enough oxygen.
Currently I have an airstone on one side of the tank but this puts tiny micro bubbles everywhere in the tank. If i put the spray bar above the water line, it also creates soo many micro bubbles. Anyone know of a good way to create good oxygen without having the water fall effect or airstone?
Last edited by asianpuffer on Tue May 11, 2010 11:48 am, edited 1 time in total.
User avatar
J-P
Former Staff Member
Posts: 5626
Joined: Tue Oct 13, 2009 12:21 am
Gender: Male
Location (country): Japan
Location: Sasebo, Nagasaki, Japan

Re: Oxygen Help

Post by J-P »

I have never had micro bubbles from an air stone.

Does this happen all the time or just during water changes?
if you follow me, you avoid stepping in the crap that I just did...

https://www.youtube.com/channel/UCZR55G ... pqlgec1A2Q
asianpuffer
Figure 8 Puffer
Posts: 229
Joined: Fri Oct 23, 2009 3:52 pm
My Puffers: 38 Gallon Tank
** 3 SAP's
Location (country): AZ

Re: Oxygen Help

Post by asianpuffer »

J-P wrote:I have never had micro bubbles from an air stone.

Does this happen all the time or just during water changes?

All the time. I believe most of it is coming from the spray bar but the bar is under the water completely. If I put the spray bar little above the water then bubbles everywhere. The water par. are perfect just dont like the sight of the mini bubbles everywhere
User avatar
J-P
Former Staff Member
Posts: 5626
Joined: Tue Oct 13, 2009 12:21 am
Gender: Male
Location (country): Japan
Location: Sasebo, Nagasaki, Japan

Re: Oxygen Help

Post by J-P »

yea strange ... how is the air getting into the spray bar anyway?

Have you tried shutting off the air stone and running them separately?
if you follow me, you avoid stepping in the crap that I just did...

https://www.youtube.com/channel/UCZR55G ... pqlgec1A2Q
asianpuffer
Figure 8 Puffer
Posts: 229
Joined: Fri Oct 23, 2009 3:52 pm
My Puffers: 38 Gallon Tank
** 3 SAP's
Location (country): AZ

Re: Oxygen Help

Post by asianpuffer »

J-P wrote:yea strange ... how is the air getting into the spray bar anyway?

Have you tried shutting off the air stone and running them separately?

Yes with the airstone turned off, tiny microbubbles appear from the spraybar. Its a xp3 and seems to be working properly ...
User avatar
Mezzovex
Figure 8 Puffer
Posts: 216
Joined: Sun Apr 04, 2010 5:39 am
Gender: Male
My Puffers: Dib the Fahaka
Location (country): United States, Oregon

Re: Oxygen Help

Post by Mezzovex »

You might have a tiny leak somwhere that is acting like a venturi. (sp?) with the airstone you could soak it in vinager. maybe its cloged with hard water deposits?
Tanks I currently own:

125g freshwater tank w\ 30g sump, 840gph pump, ocean clear canister filter,
20" fire eel, and Dib the Fahaka

55g freshwater tank w\ Magnum 330 filter
Tigger the South American Puffer

5.5g nano saltwater tank
Clean up crew + coral + a strawberry dottyback
User avatar
J-P
Former Staff Member
Posts: 5626
Joined: Tue Oct 13, 2009 12:21 am
Gender: Male
Location (country): Japan
Location: Sasebo, Nagasaki, Japan

Re: Oxygen Help

Post by J-P »

on a different tangent.. is this a SW BW or FW set up?
if you follow me, you avoid stepping in the crap that I just did...

https://www.youtube.com/channel/UCZR55G ... pqlgec1A2Q
User avatar
CarmenH
Fahaka Puffer
Posts: 539
Joined: Sat Feb 21, 2009 2:01 pm
My Puffers: Doug, Takifugu Ocellatus RIP :-(
Frankie, Monotrete Turgidus
Zephyr, ???Tetraodon nigroviridis???
Location (country): Ontario, Canada

Re: Oxygen Help

Post by CarmenH »

Are the 4 black ring clips connecting your tubing to the filter and intake/outlets on, and good and tight? I wasn't using them on mine and found out that even if the connection seems snug, without the rings it will suck in air. Mine was storing the air up and then "burping" it out once in a while rather than releasing microbubbles, but same basic issue, I think...
Carmen
Frankie, Monotrete Turgidus
Zephyr, Giant mutant Tetraodon Nigroviridis???
Odie, Tetraodon biocellatus RIP :-(
Doug, Takifugu Ocellatus RIP :-(
asianpuffer
Figure 8 Puffer
Posts: 229
Joined: Fri Oct 23, 2009 3:52 pm
My Puffers: 38 Gallon Tank
** 3 SAP's
Location (country): AZ

Re: Oxygen Help

Post by asianpuffer »

Mezzovex wrote:You might have a tiny leak somwhere that is acting like a venturi. (sp?) with the airstone you could soak it in vinager. maybe its cloged with hard water deposits?
The airstone is brand new and even with it off, the tank still has bubbles.
asianpuffer
Figure 8 Puffer
Posts: 229
Joined: Fri Oct 23, 2009 3:52 pm
My Puffers: 38 Gallon Tank
** 3 SAP's
Location (country): AZ

Re: Oxygen Help

Post by asianpuffer »

J-P wrote:on a different tangent.. is this a SW BW or FW set up?
38 gallon freshwater with 3 SAP
asianpuffer
Figure 8 Puffer
Posts: 229
Joined: Fri Oct 23, 2009 3:52 pm
My Puffers: 38 Gallon Tank
** 3 SAP's
Location (country): AZ

Re: Oxygen Help

Post by asianpuffer »

CarmenH wrote:Are the 4 black ring clips connecting your tubing to the filter and intake/outlets on, and good and tight? I wasn't using them on mine and found out that even if the connection seems snug, without the rings it will suck in air. Mine was storing the air up and then "burping" it out once in a while rather than releasing microbubbles, but same basic issue, I think...
Yes all 4 are on and tight. When I feed the puffers I unplug the XP3 then after 3 mins or so, i plug the unit back in...could this be causing it?
User avatar
CarmenH
Fahaka Puffer
Posts: 539
Joined: Sat Feb 21, 2009 2:01 pm
My Puffers: Doug, Takifugu Ocellatus RIP :-(
Frankie, Monotrete Turgidus
Zephyr, ???Tetraodon nigroviridis???
Location (country): Ontario, Canada

Re: Oxygen Help

Post by CarmenH »

I just don't see how...air has got to be getting in somewhere :?
Carmen
Frankie, Monotrete Turgidus
Zephyr, Giant mutant Tetraodon Nigroviridis???
Odie, Tetraodon biocellatus RIP :-(
Doug, Takifugu Ocellatus RIP :-(
asianpuffer
Figure 8 Puffer
Posts: 229
Joined: Fri Oct 23, 2009 3:52 pm
My Puffers: 38 Gallon Tank
** 3 SAP's
Location (country): AZ

Re: Oxygen Help

Post by asianpuffer »

i was browsing the net and found several other users having the same bubbling issues with the xp3... i may just have to return this unit and get something else. any suggestions?
asianpuffer
Figure 8 Puffer
Posts: 229
Joined: Fri Oct 23, 2009 3:52 pm
My Puffers: 38 Gallon Tank
** 3 SAP's
Location (country): AZ

Re: Oxygen Help

Post by asianpuffer »

CarmenH wrote:I just don't see how...air has got to be getting in somewhere :?
ugh so frustrating
User avatar
Mezzovex
Figure 8 Puffer
Posts: 216
Joined: Sun Apr 04, 2010 5:39 am
Gender: Male
My Puffers: Dib the Fahaka
Location (country): United States, Oregon

Re: Oxygen Help

Post by Mezzovex »

does the issue stop after a while? i know on my 125g system when i turn off the pump it sucks water down till the water level reaches my vacume break hole. once that happens and i turn my pump back on, it has to purge out the air, resaulting in tiny bubbles...
Tanks I currently own:

125g freshwater tank w\ 30g sump, 840gph pump, ocean clear canister filter,
20" fire eel, and Dib the Fahaka

55g freshwater tank w\ Magnum 330 filter
Tigger the South American Puffer

5.5g nano saltwater tank
Clean up crew + coral + a strawberry dottyback
Post Reply