Hey all, just putting a quick note here in case anyone has any idea of something that might help me.
I'll be putting in a call to Coralife on Monday, but thought I'd see if anyone's had this issue.
I have a Coralife compact flourescent 65w x2 fixture on my saltwater tank. It has suddenly stopped working, but not entirely. Sometimes it does turn on, sometimes it doesn't. I thought at first that it was the timer, but no, its the fixture.
What its doing right now is, when you turn it on via the switch, both blubs briefly flicker on then shut back off. When you flick the switch again a few times, nothing happens.. let it sit for 30 seconds or so and it will flick on for a half second when you flip the switch, but they will not stay on.
It kind of seems like a fuse/circuit breaker within the fixture is triggering, but then it resets itself? None of the wires seem to be loose or have any salt buildup on them.. I'm hoping its a simple fix, I can't afford a whole new fixture right now.. and my corals are not happy that their light hasn't been working. I'm going to have to shuffle the 55w cf off the planted 29 and put it over the 75, thank goodness all my corals are on one side...
Any ideas/suggestions?
Lighting issue
- edmlfc1
- Mbu Puffer
- Posts: 2011
- Joined: Sun Sep 09, 2007 5:03 pm
- My Puffers: Elvis (Stars & Stripes) R.I.P. 9/11/11
125G:Fahaka (Annabelle) - Location (country): U.S.A.
- Location: Texas
Re: Lighting issue
Bad ballast? Do those even have a ballast?
Need to know what kind of puffer you have? Click on Puffer ID.....Puffer ID: ug.php/v/PufferPedia/
What to feed your puffer? Click on Feeding......
Feeding: library/feeding/feeding-your-puffers/
Have a GSP, need more information......Click on GSP Article.....
GSP Article: library/puffers-in-focus/an-introductio ... d-puffers/
What to feed your puffer? Click on Feeding......
Feeding: library/feeding/feeding-your-puffers/
Have a GSP, need more information......Click on GSP Article.....
GSP Article: library/puffers-in-focus/an-introductio ... d-puffers/
- edmlfc1
- Mbu Puffer
- Posts: 2011
- Joined: Sun Sep 09, 2007 5:03 pm
- My Puffers: Elvis (Stars & Stripes) R.I.P. 9/11/11
125G:Fahaka (Annabelle) - Location (country): U.S.A.
- Location: Texas
Re: Lighting issue
Here you go, just in case I'm right:
http://www.drsfostersmith.com/product/p ... catid=3839
http://www.drsfostersmith.com/product/p ... catid=3839
Need to know what kind of puffer you have? Click on Puffer ID.....Puffer ID: ug.php/v/PufferPedia/
What to feed your puffer? Click on Feeding......
Feeding: library/feeding/feeding-your-puffers/
Have a GSP, need more information......Click on GSP Article.....
GSP Article: library/puffers-in-focus/an-introductio ... d-puffers/
What to feed your puffer? Click on Feeding......
Feeding: library/feeding/feeding-your-puffers/
Have a GSP, need more information......Click on GSP Article.....
GSP Article: library/puffers-in-focus/an-introductio ... d-puffers/
- Myaj
- Tech Team
- Posts: 4587
- Joined: Sat Jun 04, 2005 12:27 pm
- Gender: Female
- My Puffers: Bubba, turgidus
Paris, lined burrfish - Location: SE Wisconsin
- Contact:
Re: Lighting issue
Well, I'm sure a new ballast would fix the issue.. but then I might as well buy a whole new fixture if I'm going to spend that much (and that's a regular one, the CF ones are more).
I'm hoping its just a fuse or something like that.
I'm hoping its just a fuse or something like that.
- Jase
- Mbu Puffer
- Posts: 1579
- Joined: Sat Jan 12, 2008 3:13 am
- Gender: Male
- My Puffers: RIP Hootey :(
- Location (country): USA
- Location: Montana
Re: Lighting issue
sounds like the ballast to me as well.
Coralife might do something though, they seem like a good company. (expensive but good)
Coralife might do something though, they seem like a good company. (expensive but good)
-Jase
edmlfc1 wrote:A house without a puffer is not a home.![]()
- Iliveinazoo
- Fahaka Puffer
- Posts: 826
- Joined: Thu Jul 17, 2008 8:09 am
- Gender: Male
- My Puffers: 1xFigure 8
- Location (country): UK
- Location: Southampton
Re: Lighting issue
Ah, the joys of changing from simple inexpensive starter's to electronic ballasts.
It does sound like the ballast but i would definately rule out a faulty lamp first?
Always change a flickering lamp as soon as you can because it will shorten the lifespan of the ballast.
It does sound like the ballast but i would definately rule out a faulty lamp first?
Always change a flickering lamp as soon as you can because it will shorten the lifespan of the ballast.
- Myaj
- Tech Team
- Posts: 4587
- Joined: Sat Jun 04, 2005 12:27 pm
- Gender: Female
- My Puffers: Bubba, turgidus
Paris, lined burrfish - Location: SE Wisconsin
- Contact:
Re: Lighting issue
Considering the fixture has two lamps, and both of them are doing the exact same thing (flicking on only for a fraction of a second when you flip the switch), I'm leaning towards ballast as well.
Going to try to get some customer service.. wish me luck!
Going to try to get some customer service.. wish me luck!
- edmlfc1
- Mbu Puffer
- Posts: 2011
- Joined: Sun Sep 09, 2007 5:03 pm
- My Puffers: Elvis (Stars & Stripes) R.I.P. 9/11/11
125G:Fahaka (Annabelle) - Location (country): U.S.A.
- Location: Texas
Re: Lighting issue
Well did you find out? Don't leave us hanging!
Need to know what kind of puffer you have? Click on Puffer ID.....Puffer ID: ug.php/v/PufferPedia/
What to feed your puffer? Click on Feeding......
Feeding: library/feeding/feeding-your-puffers/
Have a GSP, need more information......Click on GSP Article.....
GSP Article: library/puffers-in-focus/an-introductio ... d-puffers/
What to feed your puffer? Click on Feeding......
Feeding: library/feeding/feeding-your-puffers/
Have a GSP, need more information......Click on GSP Article.....
GSP Article: library/puffers-in-focus/an-introductio ... d-puffers/
- Myaj
- Tech Team
- Posts: 4587
- Joined: Sat Jun 04, 2005 12:27 pm
- Gender: Female
- My Puffers: Bubba, turgidus
Paris, lined burrfish - Location: SE Wisconsin
- Contact:
Re: Lighting issue
LOL sorry, they were closed by the time I called. I'm calling in a few minutes, after I pull the fixture off the tank and take a good hard look at it.
