My boyfriend got me a new tank for Christmas, and threw out the box the filter came in.
Here's the filter itself:
And the setup:
I purchased the plain square ones, but they obviously don't fit (I have no idea what I was thinking... thank god I got them at WalMart and you can return anything there...). The tank needs a filter change BADLY. I've been cleaning it off every week of fishy goo until we can actually find a new filter. Thanks for the help.
Edit: Because I is smrt... What is the make/model of the cartridge?
Last edited by Christemo on Thu Jan 15, 2009 10:59 pm, edited 1 time in total.
Two F8's, two tiny fantails and a pleco call me mommy.
My Puffers: Puffers I have kept: T lineatus T miurus A modestus T biocellatus C valentini C coranata C papuan C lorteti DPs suvattii burrfish T niphobles
Looks like a Marineland/Tetra brand... which means it could be a Tetra (aka Whisper) or a Regent. It's not a Penguin 'cause there's no biowheel. However, if it's a Regent, it'll take Penguin cartridges.
Another thing you could do: unplug and empty the filter, then turn the entire thing upside down. The brand name should be molded into the plastic on the bottom of the impeller section, or possibly the bottom of the basket section. If you see anything there, post and let us know?
tank: saltwater 55g, one 5" GSP named Random (mka Puff)
I got one of them with a used tank I picked up. Think it is an Aqua tech filter- Walmart brand. Is it 5 inches across (width side to side as held in pic)?- if it is it takes the #1 EZ change filters from Walmart. Check the size rating on bottom of the filter where the cord goes in- this way you can use the size rating on the box of filter cartridges to get the correct size. Also the one I have as a label on the underside of the cover that gives what size cartridge it takes. Hope this helps.