2009 Project

A place to discuss general puffer care or news.
Post Reply
User avatar
flash.dan
Green Spotted Puffer
Posts: 433
Joined: Fri Aug 22, 2008 9:50 am
My Puffers: 8 years of FW puffer care!
currently have 1x mbu
Bubba 17" gentle giant... loves a belly tickle.
2x Suvatti Pair
1x Carinotetraodon borneensis
Location: Coventry, UK

2009 Project

Post by flash.dan »

im going to make a acrylic tank + sump just had a quote for the acrlyic etc in 12mm cast acrylic

9Lx2Hx3W Tank which is 403.94 UK gallons -> 1830L
4Lx1Hx1.5W Sump 44.88 Gallons -> 203.75L equal to 8x Eheim 2080s ((the biggest external available))

acrylic will cost me just shy of £1000 and ill be able to peice it together in about 2-3 days

Ill build it with 2-3x overflows linked to kent float valves in the sump to stop it from overflowing and 4x return pumps all attached to spreybars 2 pumps powering each end of a large central spreybar and 2 smaller ones on each side.......

the sump will have 4 main compartments i wont go into detail appart from saying it will be fantastic!

Project will start maybe next year as at themoment i have a 6x2 and a mbu to rehome while i work on all this. My gut feeling is to give her to pet shop to look after for 2-3 weeks and sell old tank..... this will help to raise money also as the whole setup will be COSTLY!!!! :(

budget will be as follows

Acrylic Tank + Sump - £987.00 made by meeee i have all the tools already so its a good start
Stand + Lid...... No idea with lid i may had halide lights and scrap a lid?! stand - £200
60Kilos Sand - £80-£100
40kilos Gravel - £40
20kilos Rocks / Slate - £35 --- Ill probably walk through the local parks etc and see what i find :)
Large peice of Bogwood - £70
Sump pumps - £120 - Ebay =)) ill see whats about......
Pipework.... Eheim piping about 35M @£1.25 M + Fixtures £25 = £68.75
Ply Board 9x3 4x1.5 - £20
polysteryne sheet 9x3 4x1.5 - £15 inc postage
lighting...... no idea i wont include this!

so im in for about £1600-£1700 but to be honest where would you get a 9x3x2 acrylic tank + sump full setup for this price?? most tank maufactures would charge £2000+++ for a 5x2x2 in acrylic

haha i should start my own business. oh by the way if anyone wants info on how to go about building this fel free to mail me
User avatar
marksrush
Fahaka Puffer
Posts: 856
Joined: Sat Sep 13, 2008 8:10 pm
Gender: Male
My Puffers: One GSP.
Location (country): USA
Location: Raymore, Missouri USA

Re: 2009 Project

Post by marksrush »

Impressive! You should post photos when you start building it so we can watch your progress.
User avatar
flash.dan
Green Spotted Puffer
Posts: 433
Joined: Fri Aug 22, 2008 9:50 am
My Puffers: 8 years of FW puffer care!
currently have 1x mbu
Bubba 17" gentle giant... loves a belly tickle.
2x Suvatti Pair
1x Carinotetraodon borneensis
Location: Coventry, UK

Re: 2009 Project

Post by flash.dan »

defenatly i will do
User avatar
Homer
Green Spotted Puffer
Posts: 297
Joined: Mon Oct 06, 2008 3:43 am
My Puffers: 200G - 1X Fahaka Puffer
60G - Planted Tank (Panda Loaches / Celestial Pearl Danios / Clown Killi / CRS / Needle Nose Pike)
50G - Planted Tank (CRS only tank)
Location (country): Hong Kong

Re: 2009 Project

Post by Homer »

that sounds like a huge project your taking on, but one of the questions you asked has been on my mind for a while as well, which is how do you in essence cover a tank that is over say 8ft long and over 2ft deep to prevent risking a puffer jumping out the tank...
Sleep is the cousin of Death...
User avatar
flash.dan
Green Spotted Puffer
Posts: 433
Joined: Fri Aug 22, 2008 9:50 am
My Puffers: 8 years of FW puffer care!
currently have 1x mbu
Bubba 17" gentle giant... loves a belly tickle.
2x Suvatti Pair
1x Carinotetraodon borneensis
Location: Coventry, UK

Re: 2009 Project

Post by flash.dan »

Homer wrote:that sounds like a huge project your taking on, but one of the questions you asked has been on my mind for a while as well, which is how do you in essence cover a tank that is over say 8ft long and over 2ft deep to prevent risking a puffer jumping out the tank...

easy..... glass sliders the two holes will be 90x 60 so too big for plexy glass as it will bow over that distance. So ill just use weld on #4 to weld on some runners and put some removable beading on the 4th edge for maintance etc..... the lid will be a complete 9x3 12mm acrylic section with 4" round the rim 6" at each side and 8" central support. this will make it about 25% stronger than bracing on the top but about 15% more expencive.

Ive decided on LEDs on a basic hood as there lighter longer lasting and brighter, oh and dont heat up as much as acrylic has a bp of 80 degrees.

I think i can get sump / tank and electricals / pipes setup in about 1.5 // 2 days.......

the only thing i was wondering is...... I dont want to dril the tank.... have a look at the below image tell me your ideas if this will work? basically using float valves to control how much liquid enters the sump to stop overflowing from syphons... the only problem i could see was waste blocking float valves so i designed this :)

http://img291.imageshack.us/img291/1920/tankga5.jpg
User avatar
yunachin
Former Staff Member
Posts: 1753
Joined: Fri Nov 09, 2007 1:33 pm
Gender: Female
My Puffers: 1x A. Meleagris (Golden)
2x Tetraodon nigroviridis
1x Tetraodon lineatus
1x A. hispidus
2x Takifugu Ocellatus
9x Tetraodon biocellatus
1x Canthigaster solandri
1x Diodon Holocanthus
2x A. nigropunctatus
1x Tetraodon miurus
1x Irrubesco
Location (country): USA
Location: SC

Re: 2009 Project

Post by yunachin »

Very nice. I really like the acrylic for the larger tanks. We have a 480 that is acrylic and I am very pleased with it. When I get the laptop working I will post some pictures. I look forward to seeing your work.
E.Ridgeway
User avatar
flash.dan
Green Spotted Puffer
Posts: 433
Joined: Fri Aug 22, 2008 9:50 am
My Puffers: 8 years of FW puffer care!
currently have 1x mbu
Bubba 17" gentle giant... loves a belly tickle.
2x Suvatti Pair
1x Carinotetraodon borneensis
Location: Coventry, UK

Re: 2009 Project

Post by flash.dan »

its going to be a massive project because i want it in the wall.... the wall in question is load bearing with wooden floor boards surrounding so ill have to get the whole floor lifted off and concrete put in and a 12 foot lintel put up then theres the cost of the acrylic about £1300 think it may be a 6-8 month project haha
Nick
Former Staff Member
Posts: 3231
Joined: Sun Oct 22, 2006 8:47 pm
My Puffers: Mine:
GSPs - Shakespeare and Jillybean
F8 - Velvet
My fiance:
DP - Emma Goldman
Narrow Lined Puffer - Ulrike
Location (country): Northeastern USA
Location: Middletown, CT
Contact:

Re: 2009 Project

Post by Nick »

That's a cool design - I've not heard of kent valves, but I was actually thinking using a toilet tank thinger might work well, and my guess is those are similar.
No matter how magnificent your successes or devastating your failures, the worlds' approximately 5 billion impoverished people could not possibly care less.
User avatar
flash.dan
Green Spotted Puffer
Posts: 433
Joined: Fri Aug 22, 2008 9:50 am
My Puffers: 8 years of FW puffer care!
currently have 1x mbu
Bubba 17" gentle giant... loves a belly tickle.
2x Suvatti Pair
1x Carinotetraodon borneensis
Location: Coventry, UK

Re: 2009 Project

Post by flash.dan »

Nick wrote:That's a cool design - I've not heard of kent valves, but I was actually thinking using a toilet tank thinger might work well, and my guess is those are similar.

the problem i can see is the pre filter to stop the float valves getting blocked but ill use a small water canister just drill some 1/2 bulkheads in using eheim pipes i think. ill need one or two old fassioned overflows aswell just incase there is a blockage but should be amazing filtration.
User avatar
dmill82
Figure 8 Puffer
Posts: 143
Joined: Mon Jun 23, 2008 4:45 pm
My Puffers: 4 SAPs and a fahaka puffer

Re: 2009 Project

Post by dmill82 »

hello flash dan,sorry its of the subject but i reconise your name from another site where you was looking for a certain crayfish,did you have any luck as ive looked all around and would be interested if possible to get 1 from anywhere.
Post Reply