Hello from Texas

[fishboytk]

Hi, I've been looking at this forum for a few months now and decided to join. A couple weeks ago, I got a New Guinea Red Line Tribal Puffer. Yesterday, he/she passed away due to stress and being nipped at in the pet store. So, I'm going to try a Figure Eight Puffer or two. My current tanks are a 55g African Cichlid tank, 5 Betta tanks, 10g Angelfish tank, and a 15g Fancy Goldfish tank

[edmlfc1]

Glad to see you made it here.

There are great people here that know alot about puffers. These are the people that taught me everything I know.

[fishboytk]

Glad to see you made it here.

There are great people here that know alot about puffers. These are the people that taught me everything I know.

Thanks!

[Pufferpunk]

Are you planning on setting up a seperate BW tank for them? Se the F8 article in our Library.

[fishboytk]

Are you planning on setting up a seperate BW tank for them? Se the F8 article in our Library.

Whats BW?

[Pufferpunk]

Brackish water. Be sure to read that article.

I lived in Odessa for 3 years.

[edmlfc1]

That's when you mix sea salt not aquarium salt in your freshwater. You need a hydrometer that starts at 1.000 or 1.001 (can't remember where they start) to check your sg. I know you have a fw tank set up for a puffer and if I remember right it's fully cycled (correct me if I'm wrong). Get a hydrometer and you can raise your sg by .002 per week without killing off your bacteria. Figure 8's require 1.005 sg. You can have it raised within 3 weeks and ready for your puffers.

[fishboytk]

Brackish water. Be sure to read that article.

I lived in Odessa for 3 years.

OK, I'm in Houston. Yeah, I'll set up a BW tank for them, I just need to find some. At 1" a 20g should hold two until they get to about 2" right?

[fishboytk]

That's when you mix sea salt not aquarium salt in your freshwater. You need a hydrometer that starts at 1.000 or 1.001 (can't remember where they start) to check your sg. I know you have a fw tank set up for a puffer and if I remember right it's fully cycled (correct me if I'm wrong). Get a hydrometer and you can raise your sg by .002 per week without killing off your bacteria. Figure 8's require 1.005 sg. You can have it raised within 3 weeks and ready for your puffers.

Yup, I have a 20g tank thats been up and runing for about a week and a half now. I called Petsmart last night and they said they have hydrometers for $8.99.

[edmlfc1]

You need to test your water and make sure it's cycled before you put another puffer in it. Puffer's are very sensitive to amm., nitrites and high nitrates. Please don't rush the cycle process. Make sure when you get the hydrometer that it starts at 1.001 not 1.012. The first time I purchased one I got the wrong one. Here is some really good reading material.
http://www.badmanstropicalfish.com/brac ... ckish.html

library/puffers-in-focus/fig8/

ug.php/v/PufferPedia/Brackish/T_Biocellatus/

[Pufferpunk]

Make sure you get one that starts at 1.000.

[fishboytk]

You need to test your water and make sure it's cycled before you put another puffer in it. Puffer's are very sensitive to amm., nitrites and high nitrates. Please don't rush the cycle process. Make sure when you get the hydrometer that it starts at 1.001 not 1.012. The first time I purchased one I got the wrong one. Here is some really good reading material.
http://www.badmanstropicalfish.com/brac ... ckish.html

library/puffers-in-focus/fig8/

ug.php/v/PufferPedia/Brackish/T_Biocellatus/

I'm borrowing one from a friend that starts at 1.000.

[edmlfc1]

Excellent!

[Pufferpunk]

I have a 20g tank thats been up and runing for about a week and a half now.

What's in the tank now?

[fishboytk]

Excellent!

I just took a reading and it says the water is at 1.002