Page 1 of 3

Spraybar BUBBLES

Posted: Sun May 09, 2010 8:27 pm
by asianpuffer
I am having a hard time setting up my tank so it gets enough oxygen.
Currently I have an airstone on one side of the tank but this puts tiny micro bubbles everywhere in the tank. If i put the spray bar above the water line, it also creates soo many micro bubbles. Anyone know of a good way to create good oxygen without having the water fall effect or airstone?

Re: Oxygen Help

Posted: Sun May 09, 2010 8:36 pm
by J-P
I have never had micro bubbles from an air stone.

Does this happen all the time or just during water changes?

Re: Oxygen Help

Posted: Sun May 09, 2010 8:40 pm
by asianpuffer
J-P wrote:I have never had micro bubbles from an air stone.

Does this happen all the time or just during water changes?

All the time. I believe most of it is coming from the spray bar but the bar is under the water completely. If I put the spray bar little above the water then bubbles everywhere. The water par. are perfect just dont like the sight of the mini bubbles everywhere

Re: Oxygen Help

Posted: Sun May 09, 2010 8:46 pm
by J-P
yea strange ... how is the air getting into the spray bar anyway?

Have you tried shutting off the air stone and running them separately?

Re: Oxygen Help

Posted: Sun May 09, 2010 8:50 pm
by asianpuffer
J-P wrote:yea strange ... how is the air getting into the spray bar anyway?

Have you tried shutting off the air stone and running them separately?

Yes with the airstone turned off, tiny microbubbles appear from the spraybar. Its a xp3 and seems to be working properly ...

Re: Oxygen Help

Posted: Sun May 09, 2010 9:17 pm
by Mezzovex
You might have a tiny leak somwhere that is acting like a venturi. (sp?) with the airstone you could soak it in vinager. maybe its cloged with hard water deposits?

Re: Oxygen Help

Posted: Sun May 09, 2010 9:20 pm
by J-P
on a different tangent.. is this a SW BW or FW set up?

Re: Oxygen Help

Posted: Sun May 09, 2010 9:39 pm
by CarmenH
Are the 4 black ring clips connecting your tubing to the filter and intake/outlets on, and good and tight? I wasn't using them on mine and found out that even if the connection seems snug, without the rings it will suck in air. Mine was storing the air up and then "burping" it out once in a while rather than releasing microbubbles, but same basic issue, I think...

Re: Oxygen Help

Posted: Sun May 09, 2010 11:34 pm
by asianpuffer
Mezzovex wrote:You might have a tiny leak somwhere that is acting like a venturi. (sp?) with the airstone you could soak it in vinager. maybe its cloged with hard water deposits?
The airstone is brand new and even with it off, the tank still has bubbles.

Re: Oxygen Help

Posted: Sun May 09, 2010 11:35 pm
by asianpuffer
J-P wrote:on a different tangent.. is this a SW BW or FW set up?
38 gallon freshwater with 3 SAP

Re: Oxygen Help

Posted: Sun May 09, 2010 11:36 pm
by asianpuffer
CarmenH wrote:Are the 4 black ring clips connecting your tubing to the filter and intake/outlets on, and good and tight? I wasn't using them on mine and found out that even if the connection seems snug, without the rings it will suck in air. Mine was storing the air up and then "burping" it out once in a while rather than releasing microbubbles, but same basic issue, I think...
Yes all 4 are on and tight. When I feed the puffers I unplug the XP3 then after 3 mins or so, i plug the unit back in...could this be causing it?

Re: Oxygen Help

Posted: Sun May 09, 2010 11:41 pm
by CarmenH
I just don't see how...air has got to be getting in somewhere :?

Re: Oxygen Help

Posted: Sun May 09, 2010 11:44 pm
by asianpuffer
i was browsing the net and found several other users having the same bubbling issues with the xp3... i may just have to return this unit and get something else. any suggestions?

Re: Oxygen Help

Posted: Sun May 09, 2010 11:50 pm
by asianpuffer
CarmenH wrote:I just don't see how...air has got to be getting in somewhere :?
ugh so frustrating

Re: Oxygen Help

Posted: Sun May 09, 2010 11:51 pm
by Mezzovex
does the issue stop after a while? i know on my 125g system when i turn off the pump it sucks water down till the water level reaches my vacume break hole. once that happens and i turn my pump back on, it has to purge out the air, resaulting in tiny bubbles...