Seaclone skimmer diy= run like a champ.
Posted: Wed Apr 07, 2010 4:24 am
Just thought I'd let anyone who cares kno. If you have a seaclone skimmer and yes I kno they suc, but if you drill a hole on the cap the size of a bubbler line a tight fit thou then run a plastic airline tube down the hole all the way to the bottom and add a wood air block made by "red sea" to the end and feed it all the way to the bottom
of your skimmer. Next the tube tightly held by skimmer lid cut the plastic tube about an inch above the skimmer cap and plug an old air bubbler to the top of the plastic tube and watch this baby go to work like a 500$ skimmer. I had to heat the bottom end of the plastic tube to add the air block but not hard. Anyways try it if u have a skimmer that isn't up to it's standards and it'll work great.
of your skimmer. Next the tube tightly held by skimmer lid cut the plastic tube about an inch above the skimmer cap and plug an old air bubbler to the top of the plastic tube and watch this baby go to work like a 500$ skimmer. I had to heat the bottom end of the plastic tube to add the air block but not hard. Anyways try it if u have a skimmer that isn't up to it's standards and it'll work great.