Page 1 of 1

Water Question

Posted: Sun Nov 15, 2009 6:23 pm
by asianpuffer
Yesterday I tested the water coming out of the faucet and noticed that no chlorine was noticed. Would I still need to add anything to the water during a water change if i dont get any chlorine readings?

Re: Water Question

Posted: Sun Nov 15, 2009 7:31 pm
by eieio
i'd be real careful there
you might check with whoever is in charge of the water that you have available
also, what kind of test kit do you have to measure chlorine?
i tried to find a kit in order to test for chlorine after regenerating Purigen, but only found the test strips, which i don't think are accurate
but in the long run, the safest thing to do would be to use a good quality dechlorinator
"Prime" is a very good one that also has other beneficial properties as well
be sure to use as directed

Re: Water Question

Posted: Sun Nov 15, 2009 11:06 pm
by asianpuffer
eieio wrote:i'd be real careful there
you might check with whoever is in charge of the water that you have available
also, what kind of test kit do you have to measure chlorine?
i tried to find a kit in order to test for chlorine after regenerating Purigen, but only found the test strips, which i don't think are accurate
but in the long run, the safest thing to do would be to use a good quality dechlorinator
"Prime" is a very good one that also has other beneficial properties as well
be sure to use as directed
Yeah all i had were the test strips and every time i test it i show no traces of chlorine..

Re: Water Question

Posted: Sun Nov 15, 2009 11:09 pm
by Jivenjune
I'd use declorinators regardless. Many of them neutralize high levels of metals. The stuff is also pretty cheap.

Re: Water Question

Posted: Sun Nov 15, 2009 11:25 pm
by asianpuffer
Currently I am using amquel plus. what are all of you using to declorinate the water?

Re: Water Question

Posted: Mon Nov 16, 2009 12:18 am
by OCgatergal

Re: Water Question

Posted: Mon Nov 16, 2009 1:23 am
by LilGreenPuffer
After a water change? You don't dechlorinate the water before you put it in?

Re: Water Question

Posted: Mon Nov 16, 2009 2:57 am
by Jivenjune
-Edited

As for brands, I like Prime the best. It's extremely concentrated, so a little goes a long way. Also has similar functions as Amquel Plus.

Re: Water Question

Posted: Mon Nov 16, 2009 7:34 am
by asianpuffer
I mean during a water change. I find it hard to believe that my sink does not have any chlorine in it but the test strips show no trace.

Re: Water Question

Posted: Mon Nov 16, 2009 11:35 pm
by OCgatergal
I have test strips as well and I have 0 in chlorine but I add the conditioner in the water just to be safe

Re: Water Question

Posted: Mon Nov 16, 2009 11:46 pm
by LilGreenPuffer
Test strips are known for inaccuracy. Try calling the water company and asking if they use chlorine and/or chloramines.

Re: Water Question

Posted: Mon Nov 16, 2009 11:47 pm
by OCgatergal
I should dip one of the test strips into my pool and see what I get.

Re: Water Question

Posted: Tue Nov 17, 2009 3:05 am
by Pufferpunk
I add Prime directly to the tank before adding fresh water from my tap.

Re: Water Question

Posted: Tue Nov 17, 2009 3:39 am
by LilGreenPuffer
So a prolonged exposure to chlorine is the issue, not a brief exposure?