Page 1 of 1
Would it be possible2create a sump out of this 1000lt cont
Posted: Tue Mar 03, 2009 10:34 am
by puffertt77
Hello
Would it be possible 2 create a sump out of this 1000litre container?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... h_SO:SI:IT
Of course it would be cleaned properly first
Thanks
Re: Would it be possible2create a sump out of this 1000lt cont
Posted: Tue Mar 03, 2009 11:12 am
by flash.dan
i have one of those which holds RO water. why would you even need a 1000L sump even if you have a huge huge tank max i woudl consider is a 5x2 tank converted into a sump / refrigium. my 8x4 has a 4x18x18 tank / sump conversaion.
those IBC containers weigh 75 kilos without the metal braces aswell not convienent to move.
Re: Would it be possible2create a sump out of this 1000lt cont
Posted: Tue Mar 03, 2009 12:03 pm
by puffertt77
flash.dan wrote:i have one of those which holds RO water. why would you even need a 1000L sump even if you have a huge huge tank max i woudl consider is a 5x2 tank converted into a sump / refrigium. my 8x4 has a 4x18x18 tank / sump conversaion.
those IBC containers weigh 75 kilos without the metal braces aswell not convienent to move.
Thanks Dan
What size sump would recommend for a 1200uk gallon tank?
I was thinking maybe I could also buy a smaller fibreglass moulded tank from the same people
ps is your 8ft tank all glass or did you build it out of plywood?
also is it 8wx2d front to backx4h top to bottom?
What do you have in it?
Re: Would it be possible2create a sump out of this 1000lt cont
Posted: Wed Mar 04, 2009 12:43 pm
by flash.dan
puffertt77 wrote:flash.dan wrote:i have one of those which holds RO water. why would you even need a 1000L sump even if you have a huge huge tank max i woudl consider is a 5x2 tank converted into a sump / refrigium. my 8x4 has a 4x18x18 tank / sump conversaion.
those IBC containers weigh 75 kilos without the metal braces aswell not convienent to move.
Thanks Dan
What size sump would recommend for a 1200uk gallon tank?
I was thinking maybe I could also buy a smaller fibreglass moulded tank from the same people
ps is your 8ft tank all glass or did you build it out of plywood?
also is it 8wx2d front to backx4h top to bottom?
What do you have in it?
its all glass 15mm double based. the size of the tank isnt really the issue its more the turnover of water. usually for puffers i base tank / sump desigbn on 4x volume p/h if you imagine my 6x2 runs off 2x external filters with 5 baskets of media and thast fine youll need maybe 3x that media for a 1200gallon which will probably fit in a 4x1 with no issues. ill take a photo of my 4x18x8 underneath later basically it has ephimech + substratpro which takes up about 40% of the sump then there is a bult in refrigium takes up about 20% and a open section which i use as a holding tank / snail / shrimp breeding section the outlet is drilled in the side of the sump with a 2x external pumps. I am upgrading the 6x2 to a sump soon and trying a few new things out with the pipework creating 1x open 1x close circit but well see how that goes
Re: Would it be possible2create a sump out of this 1000lt cont
Posted: Wed Mar 04, 2009 7:52 pm
by puffertt77
flash.dan wrote:puffertt77 wrote:flash.dan wrote:i have one of those which holds RO water. why would you even need a 1000L sump even if you have a huge huge tank max i woudl consider is a 5x2 tank converted into a sump / refrigium. my 8x4 has a 4x18x18 tank / sump conversaion.
those IBC containers weigh 75 kilos without the metal braces aswell not convienent to move.
Thanks Dan
What size sump would recommend for a 1200uk gallon tank?
I was thinking maybe I could also buy a smaller fibreglass moulded tank from the same people
ps is your 8ft tank all glass or did you build it out of plywood?
also is it 8wx2d front to backx4h top to bottom?
What do you have in it?
its all glass 15mm double based. the size of the tank isnt really the issue its more the turnover of water. usually for puffers i base tank / sump desigbn on 4x volume p/h if you imagine my 6x2 runs off 2x external filters with 5 baskets of media and thast fine youll need maybe 3x that media for a 1200gallon which will probably fit in a 4x1 with no issues. ill take a photo of my 4x18x8 underneath later basically it has ephimech + substratpro which takes up about 40% of the sump then there is a bult in refrigium takes up about 20% and a open section which i use as a holding tank / snail / shrimp breeding section the outlet is drilled in the side of the sump with a 2x external pumps. I am upgrading the 6x2 to a sump soon and trying a few new things out with the pipework creating 1x open 1x close circit but well see how that goes
Thanks for the info Dan, I look forward to the pix
ps what's RO Water?
Re: Would it be possible2create a sump out of this 1000lt cont
Posted: Thu Mar 05, 2009 4:28 am
by flash.dan
reverse osmosis water. it takes out the chlorine / chlormide and heavy metals my RO unit goes from 2.2 - 0.3 with normal membranes with a DI i get the reading down to 0.1 so its very very clean water. and saves a fortune in water conditioner (if you use it - im lucky enough my tap wwaters fine untreated )