Page 1 of 1

2009 Project

Posted: Mon Dec 22, 2008 3:28 pm
by flash.dan
im going to make a acrylic tank + sump just had a quote for the acrlyic etc in 12mm cast acrylic

9Lx2Hx3W Tank which is 403.94 UK gallons -> 1830L
4Lx1Hx1.5W Sump 44.88 Gallons -> 203.75L equal to 8x Eheim 2080s ((the biggest external available))

acrylic will cost me just shy of £1000 and ill be able to peice it together in about 2-3 days

Ill build it with 2-3x overflows linked to kent float valves in the sump to stop it from overflowing and 4x return pumps all attached to spreybars 2 pumps powering each end of a large central spreybar and 2 smaller ones on each side.......

the sump will have 4 main compartments i wont go into detail appart from saying it will be fantastic!

Project will start maybe next year as at themoment i have a 6x2 and a mbu to rehome while i work on all this. My gut feeling is to give her to pet shop to look after for 2-3 weeks and sell old tank..... this will help to raise money also as the whole setup will be COSTLY!!!! :(

budget will be as follows

Acrylic Tank + Sump - £987.00 made by meeee i have all the tools already so its a good start
Stand + Lid...... No idea with lid i may had halide lights and scrap a lid?! stand - £200
60Kilos Sand - £80-£100
40kilos Gravel - £40
20kilos Rocks / Slate - £35 --- Ill probably walk through the local parks etc and see what i find :)
Large peice of Bogwood - £70
Sump pumps - £120 - Ebay =)) ill see whats about......
Pipework.... Eheim piping about 35M @£1.25 M + Fixtures £25 = £68.75
Ply Board 9x3 4x1.5 - £20
polysteryne sheet 9x3 4x1.5 - £15 inc postage
lighting...... no idea i wont include this!

so im in for about £1600-£1700 but to be honest where would you get a 9x3x2 acrylic tank + sump full setup for this price?? most tank maufactures would charge £2000+++ for a 5x2x2 in acrylic

haha i should start my own business. oh by the way if anyone wants info on how to go about building this fel free to mail me

Re: 2009 Project

Posted: Mon Dec 22, 2008 3:37 pm
by marksrush
Impressive! You should post photos when you start building it so we can watch your progress.

Re: 2009 Project

Posted: Mon Dec 22, 2008 4:34 pm
by flash.dan
defenatly i will do

Re: 2009 Project

Posted: Tue Dec 23, 2008 2:43 am
by Homer
that sounds like a huge project your taking on, but one of the questions you asked has been on my mind for a while as well, which is how do you in essence cover a tank that is over say 8ft long and over 2ft deep to prevent risking a puffer jumping out the tank...

Re: 2009 Project

Posted: Tue Dec 23, 2008 5:06 am
by flash.dan
Homer wrote:that sounds like a huge project your taking on, but one of the questions you asked has been on my mind for a while as well, which is how do you in essence cover a tank that is over say 8ft long and over 2ft deep to prevent risking a puffer jumping out the tank...

easy..... glass sliders the two holes will be 90x 60 so too big for plexy glass as it will bow over that distance. So ill just use weld on #4 to weld on some runners and put some removable beading on the 4th edge for maintance etc..... the lid will be a complete 9x3 12mm acrylic section with 4" round the rim 6" at each side and 8" central support. this will make it about 25% stronger than bracing on the top but about 15% more expencive.

Ive decided on LEDs on a basic hood as there lighter longer lasting and brighter, oh and dont heat up as much as acrylic has a bp of 80 degrees.

I think i can get sump / tank and electricals / pipes setup in about 1.5 // 2 days.......

the only thing i was wondering is...... I dont want to dril the tank.... have a look at the below image tell me your ideas if this will work? basically using float valves to control how much liquid enters the sump to stop overflowing from syphons... the only problem i could see was waste blocking float valves so i designed this :)

http://img291.imageshack.us/img291/1920/tankga5.jpg

Re: 2009 Project

Posted: Wed Dec 24, 2008 10:36 pm
by yunachin
Very nice. I really like the acrylic for the larger tanks. We have a 480 that is acrylic and I am very pleased with it. When I get the laptop working I will post some pictures. I look forward to seeing your work.

Re: 2009 Project

Posted: Thu Dec 25, 2008 6:39 am
by flash.dan
its going to be a massive project because i want it in the wall.... the wall in question is load bearing with wooden floor boards surrounding so ill have to get the whole floor lifted off and concrete put in and a 12 foot lintel put up then theres the cost of the acrylic about £1300 think it may be a 6-8 month project haha

Re: 2009 Project

Posted: Sat Dec 27, 2008 1:13 am
by Nick
That's a cool design - I've not heard of kent valves, but I was actually thinking using a toilet tank thinger might work well, and my guess is those are similar.

Re: 2009 Project

Posted: Sat Dec 27, 2008 6:32 pm
by flash.dan
Nick wrote:That's a cool design - I've not heard of kent valves, but I was actually thinking using a toilet tank thinger might work well, and my guess is those are similar.

the problem i can see is the pre filter to stop the float valves getting blocked but ill use a small water canister just drill some 1/2 bulkheads in using eheim pipes i think. ill need one or two old fassioned overflows aswell just incase there is a blockage but should be amazing filtration.

Re: 2009 Project

Posted: Mon Jan 05, 2009 6:33 pm
by dmill82
hello flash dan,sorry its of the subject but i reconise your name from another site where you was looking for a certain crayfish,did you have any luck as ive looked all around and would be interested if possible to get 1 from anywhere.