Page 1 of 1

Substrate question

Posted: Wed Dec 17, 2008 10:54 pm
by Dadof4
What is the easiest way to change substrates? I want to change from stones to some sort of sand/mud bottom in my brackish tank. Is there a way to do this without ending up with a mini cycle?

Re: Substrate question

Posted: Wed Dec 17, 2008 11:31 pm
by Idontknow
Do a section at a time.

Re: Substrate question

Posted: Wed Dec 17, 2008 11:32 pm
by crazedpuffer
Keep all the media and decor and just take out all the old stuff and add all the new stuff. Shouldn't be much of a mini cycle if any.

Re: Substrate question

Posted: Thu Dec 18, 2008 12:02 am
by Pufferpunk
+1 I have changed over media countless tmes with no cycle.

Re: Substrate question

Posted: Thu Dec 18, 2008 1:01 am
by Nick
The most annoying part of the "how to" on substrate change is how to get all the old stuff out without creating a cloudy mess. I have found using the gravel vac without the large end tube, and sucking the old substrate out into a bucket along with the water, makes about zero mess and goes quite well. If you have a python or similar, just detach the piece from before the shutoff valve and take the tube off the end, then use it as a siphon hose. Really, any large diameter siphon tube works well.

Re: Substrate question

Posted: Thu Dec 18, 2008 1:18 am
by Dadof4
crazedpuffer wrote:Keep all the media and decor and just take out all the old stuff and add all the new stuff. Shouldn't be much of a mini cycle if any.
This is probably how I'm going to go. Would it help to save any of the old substrate and use it in mesh bags for a while or is that overkill?

Re: Substrate question

Posted: Thu Dec 18, 2008 1:28 am
by Dadof4
Nick wrote:The most annoying part of the "how to" on substrate change is how to get all the old stuff out without creating a cloudy mess. I have found using the gravel vac without the large end tube, and sucking the old substrate out into a bucket along with the water, makes about zero mess and goes quite well. If you have a python or similar, just detach the piece from before the shutoff valve and take the tube off the end, then use it as a siphon hose. Really, any large diameter siphon tube works well.
yeah, when I do this I am going to do a 100%, or as close as I can, water change so cloudy won't be a big deal going out. I want to switch to an Aggramax Sand, something mid size grain, in my brackish tank. How do I keep it from getting cloudy as I'm refilling?

Re: Substrate question

Posted: Thu Dec 18, 2008 1:37 am
by Pufferpunk
Put a big bowl in there & pour the water into the bowl.

Re: Substrate question

Posted: Thu Dec 18, 2008 11:49 am
by Dadof4
Also, at what SG would you recommend changing to a marine substrate like an argonate sand?

Re: Substrate question

Posted: Fri Dec 19, 2008 2:29 am
by Pufferpunk
You can use regular aragonite sand at any SG.

Re: Substrate question

Posted: Fri Dec 19, 2008 3:25 am
by Nick
a plastic bag under the bowl can also help a lot.