Page 2 of 2
Re: Brand new to the world of puffers
Posted: Sun Feb 08, 2009 3:11 am
by EliWhitney314
well I bought sea salt today and will be able to buy sand next week. I also lowered the temp.
Re: Brand new to the world of puffers
Posted: Sun Feb 08, 2009 3:21 am
by Dadof4
If I may make a suggestion on sand.
http://www.drsfostersmith.com/product/p ... atid=19639 Expensive but well worth it.
Re: Brand new to the world of puffers
Posted: Sun Feb 08, 2009 5:11 am
by julianchan
Also, for measuring your SG in your tank, a refractometer idiot proofs the whole process (as I am prone to doing idiotic things) Here is a cheap one, which is the same one I have.
http://cgi.ebay.com/New-Salinity-Refrac ... 1|294%3A50
Re: Brand new to the world of puffers
Posted: Sun Feb 08, 2009 1:16 pm
by EliWhitney314
Yeah I was curious as of what sand to buy, I was going to do a fine sand. Well I know this puffer starts out in brackish water, so how much salt needs to be added? I heard 1 tablespoon for every 5 gallons?
Re: Brand new to the world of puffers
Posted: Sun Feb 08, 2009 5:15 pm
by Dadof4
EliWhitney314 wrote:Yeah I was curious as of what sand to buy, I was going to do a fine sand. Well I know this puffer starts out in brackish water, so how much salt needs to be added? I heard 1 tablespoon for every 5 gallons?
Ok, sorry if this is long and that I cut and pasted it from another thread but I just typed it out yesterday. When bring up your SG, do NOT bring it up by more than .002 per week or you'll kill your biologic filter.
"You need to add the salt to a different container of water and let it mix for about 24 hours prior to adding it to your tank. I use big Rubbermaid containers and a power head. There isn't a magic number to the amount of salt to add because each bag can and will be different. You need to slowly add the salt and then test to see where your at. Sea water and brackish water is measured buy Specific Gravity (SG) with fresh water being 1.000, full marine being 1.022-1.026, and brackish in between that. They way to go about this easiest is to do it by 50% water changes. Your current water, if it's tropical will read 1.000 on the hydrometer. Mix 30 liters of water to 1.004 in a separate container. Once that has mixed well, remove 30 liters (50%) of the water from your tank and add the premixed water. What this does is give you water in your tank that will be 1.002. The math is (1.000 + 1.004)/2 = 1.002. The equation I use to figure out the SG from there on (works only when doing 50% water changes!):
N= current SG
X= desired SG of mix water
T= desired total SG
(N + X)/2 = T
So, say your current SG is 1.002 and your desired total is SG 1.004
N=1.002
T=1.004
X=?
Plug in the numbers and solve for X
(1.002 + X)/2 = 1.004
Answer: X = 1.006"
I really need to get this article finished and posted.........
Re: Brand new to the world of puffers
Posted: Sun Feb 08, 2009 7:19 pm
by EliWhitney314
Thanks for that. The only thing that confuses me is it says that this bag is for five gallons of water but I have a 65 gallon tank. Does that mean I need 13 of these to do the job? It seems like a lot of salt for a 65, although that is for marine so I guess I would need 6.5 of these. The salt part seems to be the most difficult at this point.
Re: Brand new to the world of puffers
Posted: Sun Feb 08, 2009 8:06 pm
by Dadof4
Um, what is the brand name? That must be one small bag, are you sure it doesn't say for 50 gallons? Some salts give a mixing table, x cups (or lbs) per 5 gallons gives z salinity.
Re: Brand new to the world of puffers
Posted: Sun Feb 08, 2009 9:17 pm
by busybones
EliWhitney314 wrote:Anyone know how much sand normaly costs for a 65 gallon tank?
I have pool filter sand in my tank. It's cheap (about $8 for 50lbs) and works awesome. it's kinda heavy so it doesn't get stirred up too bad and it comes steril. I went through the same thing when i set up my puffer tank

Re: Brand new to the world of puffers
Posted: Sun Feb 08, 2009 10:26 pm
by EliWhitney314
yeah it seems like it's going to take a couple hours