Beginner tips

Tain't fresh, and tain't marine! Talk about brackish setups.
Post Reply
P4RKY
Puffer Fry
Posts: 3
Joined: Mon Aug 07, 2017 4:42 pm
Location (country): Uk

Beginner tips

Post by P4RKY » Tue Aug 08, 2017 7:23 pm

I finally got myself a figure 8 yesterday , I plan to switch over to brackish when I'm back from my hols in September . However I'm confused at how I do this .
I know I need marine salt , hydrometer or refractometer , spare bucket . My question is so I need to do this slowly 1.001 then 1.002 and so on . How do I achieve this ? And then how do I maintain this when I carry on doing water changes when I achieve the desired salinity ? My maths isn't great and I'm stressing myself out , please can you dumb it down for me in a step by step ?
Thanks so much

User avatar
Iliveinazoo
Fahaka Puffer
Posts: 799
Joined: Thu Jul 17, 2008 8:09 am
Gender: Male
My Puffers: 1xFigure 8
Location (country): UK
Location: Southampton

Re: Beginner tips

Post by Iliveinazoo » Wed Aug 09, 2017 6:34 am

You'll get the hang of it in no time. Have a look at this topic:
viewtopic.php?f=8&t=19348

If you stick to 50% water changes it makes the maths more simple. Even easier if you look at the list by Dadof4 on the 6th post down in the topic.

The post recommends having a large container so you can mix all in one batch but you can make up multiple batches if you want to as long as they add up to 50% of the total volume of your tank. So say you have a 100 litre aquarium and a 10 litre bucket then 5 buckets at SG1.002 is the same as one 50 litre bucket at SG1.002.

When you do water changes bear in mind that the salt does not evaporate - only the water so if some of the water has evaporated then the salinity will have increased since the last time you checked. Before a water change re-check the salinity of the tanks and carry out the change as described above, if you want to keep the salinity the same as the tank water then just make up the new water to match the tank water.

There is no advantage in waiting to turn the water brackish, if you have naturally soft water then I would recommend turning brackish at your earliest opportunity.

User avatar
Pufferpunk
Queen Admin
Posts: 29859
Joined: Tue May 31, 2005 11:06 am
Gender: Female
My Puffers: Filbert, the 12" T lineatus
Punkster, the 4" red T miurus
Mongo, the 4" A modestus
2 T biocellatus
C valentini
C coranata
C papuan
Also kept:
lorteti
DPs
suvattii
burrfish
T niphobles
Location (country): USA, Greenville, SC
Location: Chicago
Contact:

Re: Beginner tips

Post by Pufferpunk » Wed Aug 09, 2017 8:22 am

The only reason you might wait if if the tank has recently become stable. You don't want to stress the bacteria until the parameters have been 0 ammonia/nitrite & nitrate <20, for at least a month.
You are getting sleepy... you only hear the sound of my voice... you must do water changes... water changes... water changes... water changes...

"The solution to pollution is dilution!"

Post Reply